Netgear Orbi mesh WiFi system is one of the finest networking devices that are popular for their fast-blazing internet services. To enjoy the Netgear Orbi system services hassle-free, you need to keep the device firmware updated from time to time.
However, when people try to perform an Orbi firmware update, they come across an Orbi firmware check error due to incorrect firmware procedure. If you are also facing the same kind of issue and want to fix it, then you are in right place. In this article, we are going to discuss this issue and give you proper guidance to tackle the Orbi firmware check error.
First, we would like to tell you about the reasons why a firmware check error pops up on the screen during the firmware update process. By knowing the reasons, you easily tackle the issue.
Reasons: Orbi Firmware Check Error
Here, we have outlined a few possible reasons that cause this error:
- There is the possibility that your device firmware is stuck during the automatic update.
- Technical glitches also could be the reason behind the check error.
- Followed the wrong instructions to update the firmware.
These are the reasons that cause this error again and again while updating the firmware.
Now, it’s time to tackle this issue by following the mentioned below troubleshooting tips.
Fix: Netgear Orbi Firmware Check Error
Check the Power Supply
The foremost thing you need to do is check the power source into which you plug the Netgear Orbi for the power supply. There is the possibility that your device does not get fluctuation-free power from the power socket which leads to the firmware check error. So, we recommend you check all the power connections carefully. In case you find any fault in the power socket and power cable then try to change it at the same time to resolve the issue.
Remove the Virus
The chances are high that your laptop or computer is affected by the virus. Because virus corrupts internal files and creates problem during the process of the firmware. So, we recommend you open the anti-virus software of your device and check the virus in the computer. If you find any viruses and extra trash from the system, then delete them immediately.
Once you remove the virus from the device, then you should try to update the firmware to check whether the error has been solved or not. If not, then move to a further solution.
Keep the devices Close
Now, you need to check the distance between the Orbi router and the host modem. The reason being users place the router away from the host modem which is a big mistake because due to excessive distance devices are not able to communicate with each other properly. Therefore, we recommend you to place them half distance so that they transmit the signal properly.
Avoid the Background Activity
During the Orbi firmware update, clear the background programs because sometimes background activities create issues between the firmware procedures. So, whenever you perform the firmware update, try to avoid background activity.
Reboot the Orbi Device
If you are still in the same situation then you need to perform the reboot process to remove the technical glitches. It is seen that most of the users solve this issue by performing the restart process.
So, you should also try this process. Maybe you can tackle the issue.
To restart you need to follow the following step:
- Remove the Orbi router from the wall outlet.
- Wait for a while.
- Put the Orbi back into the power socket.
- Now, power up the Orbi device.
This is how you can fruitfully restart your device. Now, you should try to perform Orbi router login to update the firmware.
Hence, now you know very well about the firmware check error and how you can solve this by performing the above-mentioned solutions.