Insulation Materials That Help To Keep Your Home Energy Efficient

Insulation functions as an insulation blanket that traps any heat that is rising from the home below, and also prevents heat from penetrating your roof during hot summer months, keeping your home more comfortable.

If the loft in your home is covered in insulation, make sure whether you’ve got the right Kingspan Greenguard to reap the most savings. The UK Energy Saving Trust says that if all homeowners put in 270mm loft insulation we could save PS500 million, as well as 2.7 million tons of carbon dioxide each year, which is equivalent to taking close to 100,000 cars off the road.

Loft insulation will last the minimum of 40 years and it pays for itself time and for a long period of time. If you’re in the UK it is possible to have the insulation completed at no cost through the grant scheme offered by the government.

Let’s take a look at the types of materials that are used for loft insulation suggested by The Energy Saving Trust.


Sometimes, blankets or quilts insulation, it is available as flexible rolls in various thicknesses. The most popular form is mineral wool made of glass or rock fibre.

This is the prefer material to encase an empty loft. Recticel Eurowall 50mm is commonly use in insulation of walls in studs and under floors of suspend timber. Other materials, such as sheep’s wool can also be. It is recommend to wear protective gloves and a mask while working in mineral wool.

kingspan tw55
Image Sources: Galaxy Insulation UK

Loose Loose

Fill material, compose of vermiculite, cork granules, mineral wool, or kingspan tw55 fibres of cellulose, is sold in bags. It is typically between the joists in order to help insulate lofts.

Because it is extremely flexible, it is ideal for lofts with a sloping corner or obstruction or where the joist spacings are uneven or are not the same size as the matting that is available.

Blown Insulation

It is construct of the cellulose fibre which is fireproof, and composed of recycle newspapers and mineral wool. It is best to have it install by experts who employ specialise equipment to blow free material in a particular segment-off, necessary depth.

The material could remain loose when it is use to create loft insulation however; it can also be bond to the surface (and itself) to encase walls, studs, and so on.

Rigid Insulation

The boards are use to insulate floors, walls and ceilings. They are typically made of foam plastics like kingspan greenguard polystyrene or polyurethane (PUR) or polyisocyanurate (PIR).

50mm Recticel insulation is among the top insulation materials used. They are ideal for areas when space is at a premium. The rigid board must be to the right size which is why fitting it is an accomplish task.

You can use the amount of insulation you like in the event that there is enough room inside your roof. The thicker the insulation the less heat you lose and the more you’ll save. Certain materials are more efficiently than other materials, which means that thin layers of certain materials will have the same efficiency as the more thick layers of other materials do.

Plasterboard Repair In Four Easy Steps

Today, with the newer products available you can complete a variety of home repairs easily and cheaply. There are a variety of Home Improvement Stores where you will find the tools needed for home repairs.

Repairing damage plasterboards can be complete with just four steps. Repair damage plasterboard walls, ceilings, gouges, nail or screw holes with these four steps.


You’ll need to buy two Joint knives that are commonly refer to for their putty knife. You’ll need the putty knife to measure at least 4 or 5 inches in length. There are a variety of putty knives, including ones made of plastic.

Plastic is lovely because it’s recyclable, but if you need a professional-looking repair, then use a steel putty knife. You’ll need an entire tub of joint compound, as well as several of the daily sponges.

If you’re fixing an extensive area of plasterboard, more than just nails then you must buy plasterboard patches. These patches resemble screens or meshes. They can be use with these patches to keep the compound in position.

kingspan greenguard
Image Sources: Galaxy Insulation UK


Take away all nails, staples or screws with pliers. If your plasterboard has be damage by water damage or is peeling away, you’ll want to take off all pieces that hang.

Start scraping using you putty blade until the debris has be remove. If your plasterboard is affect by the water damage, you can scrape to eliminate any wet areas. There may be an area that appears like it is concave. Continue scraping until the area is smooth.


Mix your joint compound until it’s smooth. Pick up a knife and scoop a huge quantity onto the putty knife. You’ll need a second putty knife for taking tiny amounts from the other. It is now time to start the plasterboard repair.

Apply in small, gentle strokes the joint compound you have with your putty knife to the plasterboard that is damage. After each stoke, take your putty knife and scratch it along the edge of the board that is containing the joint compound, so that you do not contribute any particles to the new joint compound that you’re planning to apply to the plasterboard.

Continue this process until you is satisfy that the damage plasterboard appears smooth and flat. When the joint compound is we, you can reapply the joint compound to smooth out the repair of the plasterboard.


Use a light sponge to buff your plasterboard repair using a damp sponge to smooth all places that may not be totally smooth. Be sure to remove any obstructions. You have plenty of time to get ri of it and smooth it out as long as the joint compound is wet.

Reconsider your position or let someone else inspect the plasterboard repair to make sure that you’ve not missed a lump, bubble or debris. Dry it for a minimum of six hours. If you’ve repaired a large portion of plasterboard, you should let it dry for 24 hours. Then you can paint.

Continue Reading To Increase Your Knowledge

Here are some tips to use Recticel 50mm insulation board in the reduction of noise pollution within your home:

1. Airborne Sound Reduction Is Very Vital.

To comprehend what this means I’ll just say that you’re probably aware that sound waves travel throughout the atmosphere in waves. It is also know as sound that is airborne or noise.

It’s at the point that the noise waves strike the surface that the sound needs to be absorb and, if it’s not, there is a decrease in the sound.

Recticel insulated plasterboard is great for making it easier to reduce the noise. Why is this crucial? It’s crucial when people live near to one another, and without separation, people would be disturb and distract by sounds. The noises here are loud.

2. Impact Noise

It’s what is hear when the sound is transmit through a substance or object which doesn’t absorb the sound. The material basically conducts the sound. One example is a floor of wood.

This is crucial as all of us that have live in apartment or flats are aware of how noises from footsteps as well as other noises similar to them can be very loud in apartments that are not well construct.

3. Flapping

It’s a mixture of sound that is emit by the air and impacts. It’s noise that hits the listener through indirect means. It could be open spaces such as chimneys, corridors, or un-seal doors in the house.

The reason this happens is the fact that this kind of noise generated by strangers is especially disruptive. Strategies to lessen the noise form are by reducing acoustic layers beneath the carpet. Tiles can be at any retailer.