you should first spray the spot with water to make it damp

If you are cleaning upholstery, you should first spray the spot with water to make it damp. After that, you can rub your hand over the spot to get a better feel for it. You will know if you’ve cleaned the stain if the area looks brighter than it did before you got it wet. If the stain still seems as dark as before you started rubbing it out, then you need to move on to the next step.

You should then mix a small amount of the cleaning solution with some of the distilled white vinegar. Put a small amount of the solution on a Carpet and upholstery cleaning in Maghull cotton rag and then soak the rag in the solution. When you are done, squeeze the excess liquid out.

You can use the solution you soaked the rag in on other spots on the upholstery. You can also use the solution to scrub other surfaces. Make sure to avoid using too much solution and to clean the whole area completely. Be sure to check with the manufacturer’s instructions on how to clean specific fabrics.

After that, you should let the stain dry completely. When it does, you can use some dry cleaning solution to remove the stain. If you don’t have access to dry cleaning, you should use a combination of warm water and baking soda.