Despite the fact that Nighthawk routers have proven their worth with unmatchable internet performance, some users have rotten luck. In other words, they face problems with Netgear Nighthawk routers. In case you are also unable to make the best use of the router due to various problems, this is the write-up you need to check. Here, we have penned down all the major and minor reasons that might be causing problems while using the WiFi router. Not only the reasons, but you will also learn the fixes here. So, let’s take the plunge.
How to Fix Problems with Netgear Nighthawk Router?
Update the Firmware
Users who have done Netgear Nighthawk setup often forget that Netgear rolls out a new firmware version for its devices that needs to be installed as early as possible. In case you are wondering what is the relation between the firmware update and Netgear router problems, then know that a firmware is nothing but the software of the router which houses all the instructions that run the home network efficiently. With that said, new instructions and features are added to the router with every new firmware version. Therefore, you must never delay updating the router’s firmware. You can update the firmware of the router via two means:
- Routerlogin.net web address
- Netgear Nighthawk mobile application
Give Rest to Your Router
Just as you need rest to work up to the full extent, your Netgear Nighthawk router also demands rest. The more you exhaust your WiFi router, the more the chances of facing problems with Netgear Nighthawk router. Thus, you must aim to give rest to your router regularly.
In other words, switch off your Netgear wireless router when you don’t need a WiFi connection. Additionally, reboot your router often. Doing so will keep technical hiccups a mile away from the router that acts as a magnet for major Netgear router problems.
Keep a Check on Wired Connections
Loose wired connections related to a Netgear Nighthawk router are other causes behind the WiFi problems. Therefore, keep a check on the power cable of your router and the Ethernet cable holding the router-modem connection. If the cable is found damaged, get it replaced immediately.
Apart from this, ensure that the cables connected to your WiFi devices are inserted in the correct jacks and that the respective ports are working plus clean. Otherwise, you’ll keep getting WiFi problems with Netgear Nighthawk router.
Do Not Cross the Modem’s Boundaryline
There is a possibility that after completing the Netgear Nighthawk setup process, you changed the location of your router and mistakenly placed it out of the range of the internet modem. For effective transmission of wireless signals, both devices must be placed within range of each other.
Therefore, place your Netgear router and the internet modem in such a way that a clear line of sight stays between them. But, remember that keeping them close never means that you are allowed to place your devices next to each other. The conclusion can be worse than you imagine due to a clash of WiFi signals of both devices.
Minimize WiFi Interference
No matter whether you’ve installed your WiFi router via the Nighthawk app or the routerlogin.net setup wizard, your device’s signals must not be interfered with anything. This is to bring to your attention that a WiFi router’s signals get interfered with the most when it is surrounded by devices emanating electromagnetic waves and reflexive surfaces.
Therefore, keep your router away from televisions, microwave ovens, Bluetooth speakers, mirrors, glasses, lenses, refrigerators, etc. Besides, do not place it near fish tanks, geysers, or any other object containing a large amount of water because of the ability of water to absorb WiFi signals [which are electromagnetic].
Restore the Router to Default Settings
Problems with Netgear Nighthawk router persist? If yes, then it is a sign that your router has become a victim of major issues and hence you have to opt for an advanced troubleshooting approach. Therefore, without wasting a second, restore your Netgear router to the default factory mode. This way, you will get a chance to configure it again.
To reset the router, you can either visit the router’s website “routerlogin.net” or press the Reset button located on its hardware unit. Pick the method that you find easy to implement. However, after the completion of the reset procedure, do not forget to set up the router.
To Sum Up
Problems with Netgear Nighthawk router can arise at any time and due to countless reasons. But, with the right troubleshooting approach, you can fix them easily. Here’s to hope that the tips shared above will help you resume your seamless internet experience with the router after resolving WiFi problems.
